Electronics

Arctic Alumina Thermal Adhesive 5g

Approximately 3cc total adhesive. Although lighter per set than arctic silver adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area. Specificationsmfr part number: AATA-5GFeatures: Layered composite of aluminum oxide and boron nitride.

Pure electrical insulator, neither electrically conductive nor capacitive. Two tubes containing a total of 5 grams of adhesive 2. 5 grams each of parts A and B and a plastic reusable mixing wand. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti.

A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams.

Arctic Silver 7g Premium Silver Thermal Cooling Adhesive Set ASTA-7G

7g set. Use with many components. The arctic silver Thermal Adhesive is a permanent adhesive. Components you attach with Arctic Silver Thermal Adhesive will stay attached forever Permanent adhesive.


Similar products

Arctic Alumina Thermal Adhesive 5g
Enzotech Graphics Card Passive Heat Sink, 14 x 14x 14 mm, Copper, 8-Pack
Enzotech MOS-C10 Forged Copper MOSFET Heatsinks
Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie(8 PCS )
Arctic Silver 5 Thermal Compound (Pack of 2)
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
uxcell 5 Pcs Silver Tone Aluminium Heatsink Heat Sink 100x25x10mm
uxcell a14041100ux0547 Aluminum Chipset Heatsink Heat Diffuse Dissipation Cooling Fin 50 mm x 50 mm x 20 mm Silver Tone (Pack of 2)
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Led Amplifier Transistor Semiconductor Devices with 23 pcs Fins 3.93"(L) x 2.71"(W) x 1.41"(H) / 100mm (L) x 69mm(W) x 36mm(H)
Chanzon 25pcs 1W 3W 5W LED Heat Sink (2 pin Black) Aluminum Base Plate Panel PCB Circuit Board Substrate 20mm Star DIY Heatsink Cooling for COB High Power LED Chips Lamp Beads 1/3/5 Watt


uxcell a13101700ux0207 10 Pcs 20mm x 20mm x 6mm Aluminum Heatsink for IC MOSFET SCR Pack of 10

Use heatsink adhesive glue to install heatsink on the IC. Glue is not included here. Aluminum ic heatsink for power transistor, power amplifier, SCR, MOSFET, Voltage Regulator, IC, FET, etc. Color : Silver Tone. Package content : 10 x IC Heatsinks. Use with many components. 7g set. Net weight : 28g. Permanent adhesive.

. Overall size : 20 x 20 x 6mm/08" x 08" x 024"l*w*h. Product name : iC Heatsink;Material : Aluminium. Please check the specification table and make sure that the size of the heatsink fits that of your component.


Similar products

Arctic Alumina Thermal Adhesive 5g
mod/smart Fujipoly Extreme X-e Thermal Pad - 100 x 15 x 1.0 - Thermal Conductivity 11.0 W/mK
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
mod/smart Fujipoly Extreme X-e Thermal Pad - 100 x 15 x 0.5 - Thermal Conductivity 11.0 W/mK
Cosmos ® 20 PCS mini Aluminum Chips VGA RAM Cooling Heatsinks heat sink cooler + Cosmos Cable Tie
BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
ARCTIC Thermal Pad (145 x 145 x 0.5 mm) - Silicone Based Thermal Pad with 6.0W/mK Thermal Conductivity - Flexible and Adaptive
ArctiClean 60ml Kit (includes 30ml ArctiClean 1 and 30ml ArctiClean 2)
Thermal Grizzly Conductonaut Thermal Grease Paste - 1.0 Gram
uxcell 5 Pcs Silver Tone Aluminium Heatsink Heat Sink 100x25x10mm


Cosmos ® 20 PCS mini Aluminum Chips VGA RAM Cooling Heatsinks heat sink cooler + Cosmos Cable Tie

7g set. Use with many components. Mini aluminum chips vga RAM Cooling Heatsinks heat sink cooler Permanent adhesive. Overall size : 20 x 20 x 6mm/08" x 08" x 024"l*w*h. Color : Silver Tone. Product name : iC Heatsink;Material : Aluminium. Net weight : 28g. Package content : 10 x IC Heatsinks.


Similar products

Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie(8 PCS )
GELID SOLUTIONS PWM Fan Adapter for VGA Cooler Fan
NZXT Kraken G12 - GPU Mounting Kit for Kraken X Series AIO - Enhanced GPU Cooling - AMD & NVIDIA GPU Compatible - Black
ARCTIC Accelero Xtreme IV - High-End Graphics Card Cooler with Backside Cooler for Efficient RAM and VRM-Cooling
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
ARCTIC Thermal Pad (145 x 145 x 1.5 mm) - Silicone Based Thermal Pad with 6.0W/mK Thermal Conductivity - Flexible and Adaptive
BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin for Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR,South Bridge,North Bridge, with 3M 8810 Thermally Conductive Heat Transfer Tape
Enokay 8 Pieces Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler
ARCTIC Thermal Pad (50 x 50 x 0.5 mm) - Silicone Based Thermal Pad with 6.0W/mK Thermal Conductivity - Flexible and Adaptive


Enzotech MOS-C10 Forged Copper MOSFET Heatsinks

Easy installation by thermal tape. Mos-c10 mosfet heatsinks are designed to offer excellent heat dissipation and are made from pure forged copper. Low Profile. Often used on motherboards, video cards, and for effectively dissipating the heat from other various small chips. Please be sure to measure your chips, spacing, and height clearance before purchasing.

Overall size : 20 x 20 x 6mm/08" x 08" x 024"l*w*h. Failure to properly clean the surface of the chip before installation will lead to the heatsink not adhering properly. 7g set. Color: Copper. Package content : 10 x IC Heatsinks. Model: mos-C10 Use with many components. Net weight : 28g. Forged pure copper. Product name : iC Heatsink;Material : Aluminium.

Permanent adhesive. Please be sure to follow included installation directions.


Similar products

Enzotech Graphics Card Passive Heat Sink, 14 x 14x 14 mm, Copper, 8-Pack
Arctic Alumina Thermal Adhesive 5g
Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie(8 PCS )
Enokay 8 Pieces Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler
Arctic Silver 7g Premium Silver Thermal Cooling Adhesive Set (ASTA-7G)
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
Enzotech Graphics Card Passive Heat Sink, 14 x 14 x 9 mm, Copper, 8-Pack
Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)
Samsung 860 QVO 2TB 2.5 Inch SATA III Internal SSD (MZ-76Q2T0B/AM)
Samsung 970 EVO Plus Series - 1TB PCIe NVMe - M.2 Internal SSD (MZ-V7S1T0B/AM)


Enzotech Graphics Card Passive Heat Sink, 14 x 14x 14 mm, Copper, 8-Pack

Low Profile. Permanent adhesive. Product name : iC Heatsink;Material : Aluminium. Forged pure copper. Model: bmR-C1. The bmr-c1 ram sink is far superior to traditional heat sinks currently found on the market and provides the best thermal conductivity available to dissipate heat from RAM in your system. Easy installation by thermal tape.

Net weight : 28g. Low Profile. Package content : 10 x IC Heatsinks. Color: Copper. Forged pure copper. Use with many components. Overall size : 20 x 20 x 6mm/08" x 08" x 024"l*w*h. Color: Copper. Easy installation by thermal tape. Bmr-c1 ram sinks are made using a forged copper process which produces a dense material that is extremely efficient at heat extraction.

Color : Silver Tone. Bmr-c1 ram sinks are designed to offer exceptional heat dissipation for BGA memory chips on video cards and motherboards. 7g set.


Similar products

Enzotech MOS-C10 Forged Copper MOSFET Heatsinks
Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie(8 PCS )
Arctic Silver 7g Premium Silver Thermal Cooling Adhesive Set (ASTA-7G)
Arctic Alumina Thermal Adhesive 5g
Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)
Enzotech Graphics Card Passive Heat Sink, 14 x 14 x 9 mm, Copper, 8-Pack
GELID SOLUTIONS PWM Fan Adapter for VGA Cooler Fan
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
Enokay 8 Pieces Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler
ARCTIC Thermal Pad (145 x 145 x 1.5 mm) - Silicone Based Thermal Pad with 6.0W/mK Thermal Conductivity - Flexible and Adaptive


BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad

Low Profile. Low Profile. Aluminum heatsink color:Black;Silicone Based Thermal Pad:Good Cooling, Easy Installation. Bntechgo 4 pcs 40mm x 40mm x 11mm golden aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 05mm silicone Based Thermal Pad Permanent adhesive. Package content : 10 x IC Heatsinks. Forged pure copper.

Use with many components. Color: Copper. Easy installation by thermal tape. Color: Copper. Product name : iC Heatsink;Material : Aluminium. Easy installation by thermal tape. Overall size : 20 x 20 x 6mm/08" x 08" x 024"l*w*h. Forged pure copper. 1 pcs heatsink weight:00124kg. Net weight : 28g. Heat sink size:40mm x 40mm x 11mm / 1.

57" x 1.


Similar products

Aideepen 5pcs TEC1-12706 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
Laqiya 5PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
Thermal Paste, 5 Pack ThermalCoolFlux(TM) High Performance Polysynthetic Silver Thermal Paste
Glamorway 10Pcs TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12V 5.8A
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
TEC1-12706 Thermoelectric Peltier Cooler 12 Volt 92 Watt
Diymore 10pcs TEC1-12706 4040MM 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
Yosoo 40 40mm Thermoelectric Power Generator High Temperature Generation Element Peltier Module TEG High Temperature 150°C
Electronics-Salon 2PCS Aluminum Heatsink, 1.48" x 1.44" x 0.93", Heat-Sink.
HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof


Aluminum Heat Radiator Heatsink Cooling Fin 150x69x37mm Silver Tone

Net weight : 28g. Aluminum heatsink color:Black;Silicone Based Thermal Pad:Good Cooling, Easy Installation. Easy installation by thermal tape. Use with many components. Screw is not included here. Color : Silver Tone. Forged pure copper. Bntechgo 4 pcs 40mm x 40mm x 11mm golden aluminum heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0

5mm silicone Based Thermal Pad. Package content : 1 x Heatsink. Color: Copper. Color : Silver Tone. Package content:4 pcs 40mm x 40mm x 11mm golden aluminum heatsink cooling Fin + 4 Pcs 40mm x 40mm x 05mm silicone Based Thermal Pad. Note:some scratches may be caused in the production process. Product name : Heatsink;Material : Aluminium.

Please check the specification table and make sure that the size of the heatsink fits that of your component. Package content : 10 x IC Heatsinks. Weight : 410g. Use screw to install the heatsink.


Similar products

GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Led Amplifier Transistor Semiconductor Devices with 23 pcs Fins 3.93"(L) x 2.71"(W) x 1.41"(H) / 100mm (L) x 69mm(W) x 36mm(H)
uxcell 5 Pcs Silver Tone Aluminium Heatsink Heat Sink 100x25x10mm
Arctic Alumina Thermal Adhesive 5g
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Amplifier Transistor Semiconductor Devices with Dense 19 pcs Fins 11.8"(L) x 5.51"(W) x 0.79"(H) / 300 mm (L) x 140 mm (W) x 20 mm (H)
Aideepen 5pcs TEC1-12706 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
Diymore 10pcs TEC1-12706 4040MM 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
2 pcs TEC1-12710 Thermoelectric Peltier Cooler 12V 100W 154Wmax
25Mx20mmx0.25mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply To Laptop Heatsink,LED,IGBT,Computer CPU Fan,GPU Cooler,Modules,MOS Tube,SSD Drives
Nxtop Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Led Amplifier Transistor Semiconductor Devices with 100mm (L) x 69mm(W) x 36mm(H)


uxcell 5 Pcs Silver Tone Aluminium Heatsink Heat Sink 100x25x10mm

Package content : 10 x IC Heatsinks. Forged pure copper. Color : Silver Tone. Use with many components. Weight : 163g. 7g set. Easy installation by thermal tape. Weight : 410g. 1 pcs heatsink weight:00124kg. Color : Silver Tone. Overall size : 150 x 69 x 37mm/5. 9" x 2. 7" x 1. 4" l*w*h. Product name : iC Heatsink;Material : Aluminium.

This product is manufactured by Uxcell. Bntechgo 4 pcs 40mm x 40mm x 11mm golden aluminum heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 05mm silicone Based Thermal Pad. Heat sink size:40mm x 40mm x 11mm / 1. 57" x 1. 57" x 043"l*w*h. This product is manufactured in China. Color: Copper. Color: Copper. Size : 100x25x10mm/ 4" x 1" x 0

4"l*w*h.


Similar products

GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
25Mx20mmx0.25mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply To Laptop Heatsink,LED,IGBT,Computer CPU Fan,GPU Cooler,Modules,MOS Tube,SSD Drives
Ceatech 25m x 20mm x 0.20mm Thermal Tape Double Side Adhesive for Heatsink, CPU,GPU, High Power LED, IC Chip Set, Modules, SSD Drives
Aluminum Heat Radiator Heatsink Cooling Fin 150x69x37mm Silver Tone
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
Arctic Alumina Thermal Adhesive 5g
iexcell Silver Tone Aluminium Heat Diffuser Heatsink Cooling Fin 120x100x18mm
Wingostore Heat Sink Cooling Module Aluminum Heatsink Cooler Fin (3.9" x 2" x 1.2")
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Amplifier Transistor Semiconductor Devices with Dense 19 pcs Fins 11.8"(L) x 5.51"(W) x 0.79"(H) / 300 mm (L) x 140 mm (W) x 20 mm (H)


MG Chemicals 8329TCM Thermal Conductive Adhesive, Medium Cure, 14 g, 2 Dispeners

Low Profile. It is great for heat sink bonding. Easy installation by thermal tape. Package content : 1 x Heatsink. Color: Copper. It is also used as a high-powered LED adhesive that maximizes the lifetime of LEDs by dissipating their heat. The cured adhesive bonds very well to most substrates used in electronic assemblies; and resists thermal and mechanical shocks.

Aluminum heatsink color:Black;Silicone Based Thermal Pad:Good Cooling, Easy Installation. Forged pure copper. Stores and ships at slightly below room temperature - no freezing or dry ice required. Easy 1:1 mix ratio. Product name : Heat Sink;Material : Aluminium. Very long shelf life of at least two years - even when stored at room temperature.

Weight : 163g. It may achieve a minimal service cure in seven hours at room temperature. Color : Silver Tone. Easy installation by thermal tape. Color : Silver Tone. Color : Silver Tone.


Similar products

Arctic Alumina Thermal Adhesive 5g
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
Arctic Silver 7g Premium Silver Thermal Cooling Adhesive Set (ASTA-7G)
Easycargo 30 pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 thermal conductive adhesive tape for cooling cooler Raspberry Pi 3 B+, Pi 3 B, Pi 2, Pi Model B+ (30 pcs)
MG Chemicals 8331 Silver Epoxy Adhesive - High Conductivity, 10 min working time, 14 g, 2 Dispeners
AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool
Sciplus 400 Electrically Conductive Soldering Gun Wire in a Jar
AmazonBasics Premium PLA 3D Printer Filament, 1.75mm, Black, 1 kg Spool
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
Heat-Set Insert Installation tip for #4-40, M3, and M5 Inserts Compatible with 1/4" Weller (ST Series Tips) and Hakko Soldering Irons. Used for Connecting 3D Printed Parts.


GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink

100% new Heatsink plaster. Idea for mosfet heatsink,vGA CARD Northbridge Southbridge Heatsink. Features: thermal properties, strong adhesion * Melting capacity: 0 200 ℃ / 24Hours * Evaporation: 0001% 200 ℃ / 24hours * thermal conductivity:> 1. 2w/m-k * thermal Impedance: 5. 1 * dissipation coefficient.

Application: apply to all heatsinkf no fixed clip thermal paste.


Similar products

Honbay 25pcs 5 Sizes 15x15mm IC Chipset GPU CPU Thermal Heatsink Copper Pad
Diymore 10pcs TEC1-12706 4040MM 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
uxcell 5 Pcs Silver Tone Aluminium Heatsink Heat Sink 100x25x10mm
Chanzon 25pcs 1W 3W 5W LED Heat Sink (2 pin White) Aluminum Base Plate Panel PCB Circuit Board Substrate 20mm Star DIY Heatsink Cooling for COB High Power LED Chips Lamp Beads 1/3/5 Watt
TEC1-12706 Thermoelectric Peltier Cooler 12 Volt 92 Watt
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie(8 PCS )
Aideepen 5pcs TEC1-12706 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
Easycargo 82pcs Heatsink Kit small to medium size cooler heat sink set for cooling Development Board Laptop CPU GPU VGA RAM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad