Tools & Home Improvement

douper Lid Stay with Soft Close Hinge Zinc Alloy in Satin Nickel Weight Support 40lb/2pcs, Perfect for Any Drop Lids When a Soft Closing Motion is Required, Pack of 2

#ad
#ad
douper #ad - Package includes- 2 x lid hinges, 1 x douperRInstall instruction, 1 x douperR logoed bag. Fully adjustable for differentMax 40lbs/2pcsweights by turning a screw at the middle of the arm to setup correct friction pressure. Each lid stay can be used for right or left hand mounting, bychanging the installation size on turn over the door opening angle can be adjusted in the largest 75°、90° and 110°position.

. Suitable for lids or flaps when a soft closing motion is required, holds the door in any open position or lets it slide down gently. Quality product, screws included for installation. Ps:please feel free to contact us if you have any problems of installation. Material- zinc alloy Finish- Nickel plating Overall length- 9.

douper Lid Stay with Soft Close Hinge Zinc Alloy in Satin Nickel Weight Support 40lb/2pcs, Perfect for Any Drop Lids When a Soft Closing Motion is Required, Pack of 2 #ad - 6inch weight- 5 oz/pcs Made of durbale Zinc alloy in Satin Nickel, quality assurance.

More information about douper #ad

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1

#ad
#ad
S&S Hinges BA1004X24 #ad - Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Stainless steel 304 resists corrosion up to 1, 500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion.

They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1 #ad - Continuous hinges, provide support to run the full length of the doors, also called piano hinges, panels, or pieces being joined together. The range of motion for this hinge is 270 degrees from the folded position. The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

More information about S&S Hinges BA1004X24 #ad


Similar products



Rok Hardware #6 x 5/8" Flat Head Phillips Deep Thread Wood Screws Nickel Zinc Finish - Super Value 100 Pack

#ad
#ad
Rok #ad - Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Material: Nickel, Zinc Hardened. The professional woodworkers choice - our deep thread design provides maximum holding power in a variety of different woods and man-made materials.

Rok Hardware #6 x 5/8" Flat Head Phillips Deep Thread Wood Screws Nickel Zinc Finish - Super Value 100 Pack #ad - . We have added an extra- deep phillips Recess to help minimize bit slippage; making this one of our most popular fasteners for the furniture and cabinet industry. Size: 6 x 5/8". Excellent holding power in particleboard, MDF and even plastic composites. Excellent holding power in particleboard, MDF and even plastic composites.

One of our most popular fasteners for the furniture and cabinet industry. Extra-deep Phillips Recess to help minimize bit slippage.

More information about Rok #ad


Similar products



Douper 200N/44lb Heavy Duty Gas Springs Lid Support Hinge Pneumatic Lid Lifters with Soft Close Support Heavy Drop Lids and Work Perfectly for a Soft Close Pack of 2

#ad
#ad
Douper #ad - Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance. Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance. Heavy duty hinge- 200n, heavy bench lid, etc, toy box, designed to support heavy drop lids of chest, work perfectly for a soft close.

Quality product, Comes with 2 pack, screws included for installation. We received many customer complaints against other sellers for Poor Quality. This is a 200n support 50lb/2pcs heavy duty lid support hinge, TATAMI, suits heavy lids of cabinets, or other lids of desks. Excellent holding power in particleboard, MDF and even plastic composites.

Douper 200N/44lb Heavy Duty Gas Springs Lid Support Hinge Pneumatic Lid Lifters with Soft Close Support Heavy Drop Lids and Work Perfectly for a Soft Close Pack of 2 #ad - Package includes: 2 x Lid hingeScrews included. Overall length: 11-3/5". Important notice, please read- other seller is selling fake "douper" by low price, we are the "douper" brand owner, and we never authorize them to sell our products. Pressure: 200n/44lb per strut, Max Weight Support--50lb/2pcs. Made of durable cold-rolled steel in Satin Nickel, quality assurance.

One of our most popular fasteners for the furniture and cabinet industry. Material: Nickel, Zinc Hardened.

More information about Douper #ad


Similar products



SafeStay Lid Stay 105 Degree Open with Soft Close, Easy Install

#ad
#ad
SafeStay #ad - Size: 6 x 5/8". One of our most popular fasteners for the furniture and cabinet industry. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Lids will lower slowly and gently to avoid crushing the smallest of fingers. Never have to worry about propping your lid open again.

Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance. Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance. Heavy duty hinge- 200n, toy box, designed to support heavy drop lids of chest, heavy bench lid, etc, work perfectly for a soft close.

Quality product, Comes with 2 pack, screws included for installation. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. Holds lid open - never worry again about having to prop the lid open. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked!

SafeStay Lid Stay 105 Degree Open with Soft Close, Easy Install #ad - Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting.

More information about SafeStay #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges BA1003X36 #ad - Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance. Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance. Heavy duty hinge- 200n, etc, toy box, heavy bench lid, designed to support heavy drop lids of chest, work perfectly for a soft close.

Quality product, Comes with 2 pack, screws included for installation. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. Material: Nickel, Zinc Hardened. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - . Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Pressure: 200n/44lb per strut, Max Weight Support--50lb/2pcs. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge as opposed to a flat finished or unfinished hinge is a priority.

More information about S&S Hinges BA1003X36 #ad


Similar products



Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4

#ad
#ad
Apexstone CECOMINOD060390 #ad - Lids soft open gently, Ideal for supporting the lid to keep it open. This lid stay will hold the lid open until you are ready to close. Small compact design - The compact design allows for installation in tight fit areas. Easy install instructions - Easy to follow installation instructions ensure a perfect install the first time!

Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. Holds lid open - never worry again about having to prop the lid open. Made of durable cold-rolled steel in Satin Nickel, quality assurance. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Excellent holding power in particleboard, MDF and even plastic composites. Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance.

Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4 #ad - Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance. Heavy duty hinge- 200n, toy box, etc, designed to support heavy drop lids of chest, heavy bench lid, work perfectly for a soft close.

More information about Apexstone CECOMINOD060390 #ad


Similar products



National Hardware N148-221 V570 Continuous Hinge in Nickel

#ad
#ad
National Hardware N148-221 #ad - Manufactured from cold-rolled steel, with steel pin. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Material: Nickel, Zinc Hardened. Pressure: 200n/44lb per strut, Max Weight Support--50lb/2pcs. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.

Holds lid open - never worry again about having to prop the lid open. Instructions Included, Screws Included. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, refund or return. Friction type pin will not fall out.

National Hardware N148-221 V570 Continuous Hinge in Nickel #ad - With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance. Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance.

Heavy duty hinge- 200n, heavy bench lid, etc, designed to support heavy drop lids of chest, toy box, work perfectly for a soft close. Quality product, Comes with 2 pack, screws included for installation. Support opens lids to a maximum angle of 100 degrees.

More information about National Hardware N148-221 #ad


Similar products



Gizhome 100N /22lb Soft Close Lid Support, Safety Lift Support Gas Struts Gas Springs Gas Shocks for Toy Box, Soft Down Lid Stay, Soft Close Lid Hinge, Pack of 2

#ad
#ad
Gizhome #ad - Made of durable cold-rolled steel in Satin Nickel, quality assurance. Material: Nickel, Zinc Hardened. Pressure: 200n/44lb per strut, Max Weight Support--50lb/2pcs. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. We offer 1 year 100% satisfactory warranty, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

Gizhome 100N /22lb Soft Close Lid Support, Safety Lift Support Gas Struts Gas Springs Gas Shocks for Toy Box, Soft Down Lid Stay, Soft Close Lid Hinge, Pack of 2 #ad - Friction type pin will not fall out. Package included: 2 x Soft Close Lid Struts and 10 x Screws. Support opens lids to a maximum angle of 100 degrees. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. Holds lid open - never worry again about having to prop the lid open.

Instructions Included, Screws Included. Can be cut to desired length. Features: use: designed for support on drop lids of desks, cabinets, such as appliance doors, ideal for supporting the lid to keep it closed pressure: 100 n/22 lb each hinge; Travel: 3-14/25"; Distance Between Ball Mounts Compressed: 8-7/10''; Perfect for various box/toy chest/toy box to prevent from smashing hands Package included: 2 x Soft Close Lid Struts and 10 x Screws Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, easy to use Lids soft close gently, keeping the lid up, and metal storage cabinets.

More information about Gizhome #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges #ad - Surface mount for easy installation. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Made of durable cold-rolled steel in Satin Nickel, quality assurance. Perfect for various box/toy chest/toy box to prevent from smashing hands.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - Support opens lids to a maximum angle of 100 degrees. This lid stay will hold the lid open until you are ready to close. Small compact design - The compact design allows for installation in tight fit areas. Easy install instructions - Easy to follow installation instructions ensure a perfect install the first time!

Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

More information about S&S Hinges #ad


Similar products



Sugatsune Lid Stay 105 Degree Open with Soft Close, Umber, 2 Pack

#ad
#ad
Sugatsune #ad - Compact design. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Use: designed for support on drop lids of desks, cabinets, keeping the lid up, easy to use. Lids soft close gently, Ideal for supporting the lid to keep it closed. They have nickel plated steel arms with cream colored plastic housing. Made of durable cold-rolled steel in Satin Nickel, quality assurance.

Sugatsune Lid Stay 105 Degree Open with Soft Close, Umber, 2 Pack #ad - X front to back size divided by 2. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. We offer 1 year 100% satisfactory warranty, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

Friction type pin will not fall out. Support opens lids to a maximum angle of 100 degrees. Most recommended weight of your lid: 40lb-50lb, and have a 9 inch clearance. Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance.

More information about Sugatsune #ad


Similar products


Pmelax is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.