Electronics

Neewer 31.5″/80cm Carbon Fiber Camera Track Dolly Slider Rail System with 17.5lbs/8kg Load Capacity for Stabilizing Movie Film Video Making Photography DSLR Camera Nikon Canon Sony

#ad
#ad
Neewer 10086021 #ad - U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fibre tubes. Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider. Height of legs could be adjusted from 103cm to 13cm. Gear-shaped joint interface and locking knobs for better position locking for the legs.

Easy to carry with an included carrying bag, excellent company for video making.

More information about Neewer 10086021 #ad

Neewer Professional Metal 360 Degree Rotating Panoramic Ball Head with 1/4 inch Quick Shoe Plate and Bubble Level,up to 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder

#ad
#ad
Neewer 78088671 #ad - Smooth ball joint for versatile angle moving. The base with index marking to indicate more precise control. Note: tripod head only; camera and tripod are not included Descriptions: Quick shoe plate with 1/4" screw. 3/8" screw mount at the bottom enable connection of most type of tripod or light stand 360 Degrees Swivel, equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Specifications: material: metal quick shoe Plate: 1/4" Bottom Screw Thread: 3/8" Load Capacity: 17. 6lbs/8kg package content: 1 x tripod ball Head 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle. 1/4" quick shoe plate; easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position.

Neewer Professional Metal 360 Degree Rotating Panoramic Ball Head with 1/4 inch Quick Shoe Plate and Bubble Level,up to 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder #ad - Both horizontal and vertical bubble level to enhance perception of position. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting. Easy to set up in seconds. Note: tripod head Only; Camera and tripod are not included. Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

More information about Neewer 78088671 #ad


Similar products



Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P

#ad
#ad
Powerextra 1006587 #ad - 1/4" quick shoe plate; easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting. Compatible with the following sony handycam camcorders: - ccd-rv100 - ccd-rv200 - ccd-sc5 - ccd-sc5/e - ccd-sc55e - ccd-sc55 - ccd-sc6 - ccd-sc65 - ccd-sc7 - ccd-sc7/e - ccd-sc8/e - ccd-sc9 - ccd-tr1 - ccd-tr11 - ccd-tr1100e - ccd-tr12 - ccd-tr18 - ccd-tr18e - ccd-tr1e - ccd-tr2 - ccd-tr200 - ccd-tr205 - ccd-tr215 - ccd-tr2200e - ccd-tr2300 - ccd-tr2300e - ccd-tr280pk - ccd-tr290pk - ccd-tr3 - ccd-tr300 - ccd-tr3000 - ccd-tr3000e - ccd-tr3100e - ccd-tr311e - ccd-tr315 - ccd-tr315e - ccd-tr317 - ccd-tr3200e - ccd-tr3300 - ccd-tr3300e - ccd-tr411e - ccd-tr412e - ccd-tr413 - ccd-tr414 - ccd-tr415e - ccd-tr416 - ccd-tr417 - ccd-tr417e - ccd-tr425e - ccd-tr427 - ccd-tr427e - ccd-tr500 - ccd-tr511e - ccd-tr512e - ccd-tr515e - ccd-tr516 - ccd-tr516e - ccd-tr517 - ccd-tr555 - ccd-tr57 - ccd-tr610 - ccd-tr617 - ccd-tr617e - ccd-tr618 - ccd-tr618e - ccd-tr640e - ccd-tr67 - ccd-tr710 - ccd-tr713e - ccd-tr716 - ccd-tr717 - ccd-tr717e - ccd-tr718 - ccd-tr718e - ccd-tr728 - ccd-tr728e - ccd-tr730e - ccd-tr76 - ccd-tr760e - ccd-tr810e - ccd-tr818 - ccd-tr840e - ccd-tr845e - ccd-tr87 - ccd-tr910 - ccd-tr913e - ccd-tr917 - ccd-tr918 - ccd-tr918e - ccd-tr930 - ccd-tr940 - ccd-tr97 - ccD-TRV15 - CCD-TRV16 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

. 100% compatible with the sony dcr-vx2100, hvl-lbpb, hdr-ax2000, hxr-mc2000u, hdr-fx7, dsr-pd170, nex-fs100u, hvr-z1p, hdr-fx1, hvr-z1u, hvr-v1U, dsr-pd150, mvc-fdr1, hdr-fx1000, fdr-ax1, hvr-hd1000u, nex-ea50uh, NEX-FS700U Handycam Camcorder. Upgraded li-ion rechargeable battery 7. 4v 8800mah, ultra-high capacity replacement battery for Sony NP-F970, np-f950, np-F930, NP-F960 .

Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P #ad - Fully decoded, you can check the remaining capacity, shutter count and recharge performance on the cameras power source info screen.

More information about Powerextra 1006587 #ad


Similar products



Neewer Heavy Duty Video Camera Tripod Fluid Drag Pan Head with 1/4 and 3/8 inches Screws Sliding Plate for DSLR Cameras Video Camcorders Shooting Filming,up to 11 pounds/5 kilogramsAluminum Alloy

#ad
#ad
Neewer 10090237 #ad - Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing. 1/4" quick shoe plate; easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position. The special design of security locking can prevent the equipment from falling off accidentally.

Specifications: quick shoe: yes horizontal tilt: 360 degrees front tilt: -70 degree to 90 degree Tripod Mount Thread Size: 1/4 and 3/8 inches Tension Control: Pan and tilt adjustment knobs Construction: Aluminum & Plastic Size: 3. 9x4. 7x3. 9 inch/10x12x10 cm Weight: 27. 9ounce/079kg pacakge contents: 1x fluid drag head 1x 3/8 to 1/4 inch conversion Screw 1x User Manual 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

User friendly: the side lock system allows the camera and sliding quick shoe plate as the direction of the arrows show quickly. Description: the upgraded fluid head is a very ideal solution for the HD DSLRs, which has a sliding plate which travels to balance the latest interchangeable lens cameras. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting.

Neewer Heavy Duty Video Camera Tripod Fluid Drag Pan Head with 1/4 and 3/8 inches Screws Sliding Plate for DSLR Cameras Video Camcorders Shooting Filming,up to 11 pounds/5 kilogramsAluminum Alloy #ad - Quick shoe plate: comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom included with a 3/8 inches to 1/4 inch screw adapter, making it suitable for all tripods, monopods, light stands and camera sliders.

Bubble level: security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments.

More information about Neewer 10090237 #ad


Similar products



Video Tripod System, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, DSLR Camcorder, Plus 1 Bonus Quick Release Plate

#ad
#ad
Cayer BV30L #ad - Operating Height: 33. 3" / 848 mm loading Capacity: 13. 2 lbs / 6 kg Weight: 8. 82 lbs / 4 kg packing list: 1 x bv30l tripod leg 1 x k3 fluid head 1 x 75mm half ball adapter 1 x head lock handle 1 x Extra QR Plate 2 pcs in total 2 x Hex Keys 1 x Carrying Bag 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Supports 13. 2 lb, a professional video tripod system designed for HDSLR and interchangeable lens cameras. It has no memory effect or other negative effects in recharging. Powerextra offers a 30-day money back policy, 12-month limited guarantee against manufacturing defects from date of purchase. Utmost pre-sale and after-sale customer services are also guaranteed.

Video Tripod System, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, DSLR Camcorder, Plus 1 Bonus Quick Release Plate #ad - Please note: it is not compatible with manfrotto and DJI plates,supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens. Capable of supporting up to 13. 2 lb, the bv30l provides a professional tripod system solution. Quick shoe plate: comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom included with a 3/8 inches to 1/4 inch screw adapter, monopods, making it suitable for all tripods, light stands and camera sliders.

Bubble level: security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments.

More information about Cayer BV30L #ad


Similar products



SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail – 2203

#ad
#ad
SMALLRIG 2203A-AU #ad - Rubber pads on the bottom protect your camera body from scratching. Featured recommendations】compatible with ronin s and crane 2. Key features: 1. Mutiple moutings】this cage comes with multiple mounting points, like microphone or smallrig Articulating Arm - 2070, such as 1/4'' & 3/8'' threaded holes, cold shoe and 3/8'' locating holes for ARRI standard, allow you to attach more accessories, etc.

Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp. Form-fitting design with unobstructed battery & SD card access 4. The base with index marking to indicate more precise control. It has no memory effect or other negative effects in recharging. Powerextra offers a 30-day money back policy, 12-month limited guarantee against manufacturing defects from date of purchase.

SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail – 2203 #ad - Utmost pre-sale and after-sale customer services are also guaranteed. Please note: it is not compatible with manfrotto and DJI plates,supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens. Note: tripod head Only; Camera and tripod are not included.

With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting. High customization】smallrig bmpcc 4k cage is specifically designed for blackmagic Design Pocket Cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

More information about SMALLRIG 2203A-AU #ad


Similar products



Meco VT-1510 Tripod Action Fluid Drag Head Video Camera

#ad
#ad
WAAO VT-1510 #ad - Features: 100% brand new and high quality pan rotate angle: 360° tilt control angle: -85°/+90° quick release plate with safety lock. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Mutiple moutings】this cage comes with multiple mounting points, such as 1/4'' & 3/8'' threaded holes, allow you to attach more accessories, cold shoe and 3/8'' locating holes for ARRI standard, like microphone or smallrig Articulating Arm - 2070, etc.

Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting. Limited 8-year warranty | 13. 2 lb load capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates.

Meco VT-1510 Tripod Action Fluid Drag Head Video Camera #ad - Removable handle:it comes with a right-sided non-skid handle bar, it can be removed and installed to the left side, according to your request. Note: tripod head Only; Camera and tripod are not included. 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Featured recommendations】compatible with ronin s and crane 2. Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

More information about WAAO VT-1510 #ad


Similar products



DMKFoto Heavy Duty Ball Head with Quick Release Plate

#ad
#ad
DMKFoto 1550 #ad - 100% compatible with the sony dcr-vx2100, hxr-mc2000u, fdr-ax1, hdr-fx1000, mvc-fdr1, hvr-z1p, dsr-pd170, hvr-z1u, hdr-fx7, nex-fs100u, nex-ea50uh, hvr-hd1000u, hdr-ax2000, hvl-lbpb, hdr-fx1, dsr-pd150, hvr-v1U, NEX-FS700U Handycam Camcorder. Upgraded li-ion rechargeable battery 7. 4v 8800mah, ultra-high capacity replacement battery for Sony NP-F970, np-F930, np-f950, NP-F960 .

Fully decoded, you can check the remaining capacity, shutter count and recharge performance on the cameras power source info screen. High grade digital battery with advanced lithium technology ensures maximum battery life and power. If your pod has a 1/4" screw, we can provide step-up adapter to make it fit.

DMKFoto Heavy Duty Ball Head with Quick Release Plate #ad - 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle. Tripod screw mount: 3/8" or 1/4" screw thread. The quick release plate has a 1/4" screw for all cameras. Smooth 360 degree movement. Quick shoe plate: comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom included with a 3/8 inches to 1/4 inch screw adapter, monopods, making it suitable for all tripods, light stands and camera sliders.

Bubble level: security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments. Limited 8-year warranty | 13.

More information about DMKFoto 1550 #ad


Similar products



2 Pack Cold Shoe Mount Adapter Cold Shoe Bracket Standard Shoe Type with 1/4" Thread Hole for Camera DSLR Flash Led Light Monitor Video and More

#ad
#ad
Anwenk cold shoe mount #ad - Supports 13. 2 lb, a professional video tripod system designed for HDSLR and interchangeable lens cameras. Material: Aluminum Alloy. Tripod screw mount: 3/8" or 1/4" screw thread. Single lever control for quick action. Sliding quick release plate with 1/4" screw thread Fluid drag system provide smooth consistent tilt and pan controls.

With a stop screw on the cold shoe to help position your hot shoe accessories without sliding forward. Made of solid aluminum alloy, black anodized treatment for higher durability. Precise CNC machining. For better setup, please search "smallrig mount for samsung t5 ssd 2245", "SmallRig lens adatper support for Metabones 2247" and "SmallRig HDMI cable clamp 2246", which are exclusively designed for BMPCC 4K.

2 Pack Cold Shoe Mount Adapter Cold Shoe Bracket Standard Shoe Type with 1/4" Thread Hole for Camera DSLR Flash Led Light Monitor Video and More #ad - Note:before using it, twist the Tripod Action Fluid Drag Head. Package includes: 2* cold shoe mount;4* 1/4" Screw Adaptershort and long; 2* M2. 5 screw adapters;2* Hex Spanners. Net weight: 035oz. Quick shoe plate: comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom included with a 3/8 inches to 1/4 inch screw adapter, making it suitable for all tripods, monopods, light stands and camera sliders.

Bubble level: security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments.

More information about Anwenk cold shoe mount #ad


Similar products



Neewer Pro 100% Metal Max Height 10ft/305cm Adjustable Reflector Stand with 4ft/120cm Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector, Monolight and Other Equipment

#ad
#ad
Neewer 10087101 #ad - Mutiple moutings】this cage comes with multiple mounting points, like microphone or smallrig Articulating Arm - 2070, cold shoe and 3/8'' locating holes for ARRI standard, such as 1/4'' & 3/8'' threaded holes, allow you to attach more accessories, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

Limited 8-year warranty | 13. 2 lb load capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates. Note:stand only!the monolight is not included!description:made of pure metal, giving it a longer service time and exceptional strength for heavy dutyits height is adjustable, satisfying your various shooting needsEasily attach to other equpment with its knob and spiral screwRubber padded, giving you a comfortable feeling and preventing it from sliding when you move itIts sturdy 3 legs structure at the bottom ensures your equipments safeSpecification:Material: Pure MetalCenter stand column Maximum height:10ft/120"/305cmCenter stand column Folded height: 4ft/47"/120cmExtension arm length: 4ft/47"/120cmColor:SilverSegment:3Package Contents:1 x C stand Base1 x 10ft/305cm Center stand column1 x 4ft/120cm extension arm2 x grip head 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Neewer Pro 100% Metal Max Height 10ft/305cm Adjustable Reflector Stand with 4ft/120cm Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector, Monolight and Other Equipment #ad - Sturdy aluminum alloy material with enough long time black anodized treatment for higher durability. Material: aluminium alloy. Package includes 2x cold shoe mount, 4x1/4"-20 Screw Adaptershort and long, 4XM2. 5 screw adapters, 4X Hex Spanner. Supports 13.

More information about Neewer 10087101 #ad


Similar products



Translucent, Silver, Gold, White and Black - Neewer 43-inch / 110cm 5-in-1 Collapsible Multi-Disc Light Reflector with Bag

#ad
#ad
Neewer 10000076 #ad - Built to last long Guaranteed. Size 9. 84"x9. 84"25mmx25mm. This neewer 43-inch 110cm 5-in-1 collapsible Multi-Disc Light Reflector with Bag Silver Gold White & Black. Comes with silver, black, gold, white and translucent reflectors. These are the most popular reflectors in photograph. Silver - for contrast and increase highlightsgold - achieve warm glowing skin tonesBlack - block out unwanted lightWhite - produce neutral color temperatureTranslucent - for softer look without shadow A Must For Studio Or Outdoor Photography!Durable and flexible steel spring frame insures easy spreading and closing.

It also folds into a easy to carry pouch for added convenience. Package includes:5 x 110 cm / 43-inch, collapsible disc reflectors1 x black round portable carrying bagSpecificationsShape: RoundSize open: 43 inches 110 cmSize collapsed: 15 inches 35 cm roundFits any standard reflector holderProduct Dimensions: 16.

Translucent, Silver, Gold, White and Black - Neewer 43-inch / 110cm 5-in-1 Collapsible Multi-Disc Light Reflector with Bag #ad - 2 x 1. 6 x 15. 4 inchesProduct Weight: 1. 5 poundsShipping Weight: 1. 7 poundsmultifunctionalthe silver side is very reflective and brightens both shadows and highlights but does not change the color of the available light. The gold side side works basically the same way while adding a warmer color to the image.

The white side brightens up the shadows to produce a softer light.

More information about Neewer 10000076 #ad


Similar products


Pmelax.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.