Tools & Home Improvement

WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light

#ad
#ad
WEN Products 4276 #ad - With our quiet 2. 1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. Arbor size. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. Lightweight design weighs in at 16 lb. Worklight for maximum precision and visibility. The wen 6-inch bench grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them.

These machines allow for simple resuscitation of dull blades, scissors, screwdrivers, and more. By 3/4 in. No need to waste anymore money on new tools. Compact yet powerful, the weN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Of course, our 6-inch bench grinder is covered with a two-year warranty, as with all WEN Products, a friendly and knowledgeable customer service hotline and a national service network.

WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light #ad - Remember when your blades could actually cut through something other than butter? Remember WEN. 2. 1-amp motor. Also, don't forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. 6 in.

More information about WEN Products 4276 #ad

Forney 72747 Wire Bench Wheel Brush, Fine Crimped with 1/2-Inch and 5/8-Inch Arbor, 6-Inch-by-.008-Inch

#ad
#ad
Forney 72747 #ad - Great for cleaning and blending surfaces. Forney 72747 wire bench wheel brush, fine crimped with 1/2-Inch and 5/8-Inch Arbor, 6-Inch-by-. 008-inch 6, crimped wire wheel brush, arbor 1/2-5/8, fine, wire size. Adds a great value. Typically used on bench grinders. Max 6, 000-rPM. Great for removing light burrs, paint and corrosion.

Manufactured in China. Used for light to medium duty brushing action.

More information about Forney 72747 #ad


Similar products



WEN 4288 Cast Iron Bench Grinder Pedestal Stand with Water Pot

#ad
#ad
Great Lakes Tool MFG INC 4288 #ad - Measures in at 31. 5 inch height with an onboard water pot to cool down projects. The wen bench grinder pedestal Stand resolves this issue by providing an independent surface for you to attach your tool. Compatible with the entire line of WEN Bench Grinders. Manufactured in China. Great for cleaning and blending surfaces.

Universal design fits the majority of bench grinders on the market. The heavy cast iron and steel design limits vibration while providing a sturdy 31. 5 inch pedestal for your grinder to rest on. And because it is a wen product, your bench grinder stand comes backed by a one year warranty, a stocked inventory of replacement parts, and a friendly and helpful phone line.

WEN 4288 Cast Iron Bench Grinder Pedestal Stand with Water Pot #ad - . Remember when your bench grinder stayed put? Remember WEN. Max 6, 000-rPM. Used for light to medium duty brushing action. Heavy-duty cast iron and steel construction prevents walking and wobbling during operation. And even though this stand was built with the WEN Bench Grinders in mind, its universal design accommodates the majority of bench grinders on the market.

Typically used on bench grinders. Great for removing light burrs, paint and corrosion.

More information about Great Lakes Tool MFG INC 4288 #ad


Similar products



Yost LV-4 Home Vise 4-1/2"

#ad
#ad
Yost LV-4 #ad - Typically used on bench grinders. Used for light to medium duty brushing action. 6, arbor 1/2-5/8, crimped wire wheel brush, fine, wire size. Adds a great value. Home work Shop Vise. Great for cleaning and blending surfaces. Manufactured in China. Compatible with the entire line of WEN Bench Grinders. Great for removing light burrs, paint and corrosion.

Max 6, 000-rPM. 9. 9-inch by 12. 4-inch steel mounting plate accommodates a variety of bolt orientations. Measures in at 31. 5 inch height with an onboard water pot to cool down projects. The built in pipe jaws allow holding small pipes and tubes ranging in diameter from 06"d to 1. 85"d. Holds 06" d to 1. 85" d pipes and tubes.

Yost LV-4 Home Vise 4-1/2" #ad - Jaw width 4-1/2". The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle assembly and a chrome lockdown.

More information about Yost LV-4 #ad


Similar products



Nylon, Multipurpose - Available in 4" or 6" 2 Sets in 1 - Vise Jaws - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

#ad
#ad
JCL PRODUCTS soft jaws 4 black #ad - The unique multipurpose design allows you to TURN them OVER for use on the Flat or Grooved side. 4" vise jaws that work on any Metal Vise. Measures in at 31. 5 inch height with an onboard water pot to cool down projects. Used for light to medium duty brushing action. They will not discolour or leave any marks on your Working piece, with 8 strong rear earth magnets per set, they will stay put on your metal vise.

Typically used on bench grinders. Great for cleaning and blending surfaces. Gunsmithing, fishing, carpentry, jewellery, Bicycle, Toolmaking, Locksmith AN fitting, Engineering, Automotive, Golf, Plumbing.6, arbor 1/2-5/8, fine, crimped wire wheel brush, wire size. Adds a great value. Jaw width 4-1/2". Holds 06" d to 1.

Nylon, Multipurpose - Available in 4" or 6" 2 Sets in 1 - Vise Jaws - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products #ad - 85" d pipes and tubes. 9. 9-inch by 12. 4-inch steel mounting plate accommodates a variety of bolt orientations. Swivel base allows rotating the vise 240-Degree for versatility.

More information about JCL PRODUCTS soft jaws 4 black #ad


Similar products



WEN 4208 8 in. 5-Speed Drill Press

#ad
#ad
WEN 4208 #ad - Max drill capacity is 1/2” in 1” thick cast iron. Since 1951, wen has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right.

Great for cleaning and blending surfaces. Holds 06" d to 1. 85" d pipes and tubes. Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes.

WEN 4208 8 in. 5-Speed Drill Press #ad - Operates at 5 different speeds: 740, 1530, 1100, 2100, 3140 RPM. Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations. Typically used on bench grinders. The base contains predrilled holes for mounting onto a bench or work stand. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material.

Jaw width 4-1/2". Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently.

More information about WEN 4208 #ad


Similar products



SCOTTCHEN Extra Thick Buffing Polishing Wheel 6 inch 70 Ply For Bench grinder Tool With 1/2" Arbor Hole 2 PACK

#ad
#ad
SCOTTCHEN #ad - Jaw opening 3". Swing: 8 inch. Horsepower: 1/3 HP. Easy to install:the polishing wheels are 1/2" center hole fits most bench grinder. Professional design: the polishing wheels much thicker to last longer and provide larger surface area, Thick concentrically sewn circles design holds plys together more stiffly so greater pressure can be applied.

Usage:polishing and buffing wood, metal, cast iron, brass, aluminum bronze and stone etc. Make your work easy:the extra thick buffing polishing wheels are 70 ply, Extra plys can improve work efficiency. Diameter:6 inch face, 1/2" arbor hole, h: 1" 70 ply material: cutton. Make sure the size is right for you beFORE ORDER.

SCOTTCHEN Extra Thick Buffing Polishing Wheel 6 inch 70 Ply For Bench grinder Tool With 1/2" Arbor Hole 2 PACK #ad - The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, v-pads, woodwork, protector for Barrels, Prismatic, one side multi-groove, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Great for cleaning and blending surfaces.

Used for light to medium duty brushing action. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. The 1/2" arbor hole fits most of the bench grinder、 bench Buffers or bench polisher.

More information about SCOTTCHEN #ad


Similar products



POWERTEC 15508 1/2" Arbor 150-Grit Silicon Carbide Grinding Wheel, 6" x 3/4"

#ad
#ad
POWERTEC 15508 #ad - Jaw opening 3". Operates at 5 different speeds: 740, 2100, 1530, 1100, 3140 RPM. Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE.

One side flat, woodwork, v-pads, Prismatic, protector for Barrels, one side multi-groove, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Powertec silicon carbide bench grinding wheels are ideal for small job shops and numerous general-purpose applications.

POWERTEC 15508 1/2" Arbor 150-Grit Silicon Carbide Grinding Wheel, 6" x 3/4" #ad - Used for light to medium duty brushing action. 6, fine, crimped wire wheel brush, arbor 1/2-5/8, wire size. Adds a great value. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Typically used on bench grinders. Designed to fit most stationary bench grinders. Reduce effort and increase satisfaction with these top-notch grinding wheels - perfect for tool and Cutter grinding of cemented carbide applications.

Max 6, 000-rPM. Swivel base allows rotating the vise 240-Degree for versatility.

More information about POWERTEC 15508 #ad


Similar products



360 Swivel Base with Lock, Big Size Anvil Top 4'' - HFS Heavy Duty Bench Vise

#ad
#ad
HFS 15955 #ad - Home work Shop Vise. Designed to fit most stationary bench grinders. Great for removing light burrs, paint and corrosion. Measures in at 31. 5 inch height with an onboard water pot to cool down projects. Jaw opening 3". Holds 06" d to 1. 85" d pipes and tubes. Horsepower: 1/3 HP. Easy to install:the polishing wheels are 1/2" center hole fits most bench grinder.

Professional design: the polishing wheels much thicker to last longer and provide larger surface area, Thick concentrically sewn circles design holds plys together more stiffly so greater pressure can be applied. Usage:polishing and buffing wood, brass, cast iron, metal, aluminum bronze and stone etc. Make your work easy:the extra thick buffing polishing wheels are 70 ply, Extra plys can improve work efficiency.

360 Swivel Base with Lock, Big Size Anvil Top 4'' - HFS Heavy Duty Bench Vise #ad - Diameter:6 inch face, 1/2" arbor hole, h: 1" 70 ply material: cutton. Make sure the size is right for you beFORE ORDER. Ideal for tool and cutter grinding of cemented Carbide applications. Includes a 1/2-inch keyed chuck and onboard key storage. Great for cleaning and blending surfaces. Replaceable, hardened, forged steel jaws.

More information about HFS 15955 #ad


Similar products



WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base

#ad
#ad
WEN 6500 #ad - Horsepower: 1/3 HP. Easy to install:the polishing wheels are 1/2" center hole fits most bench grinder. Professional design: the polishing wheels much thicker to last longer and provide larger surface area, Thick concentrically sewn circles design holds plys together more stiffly so greater pressure can be applied.

Usage:polishing and buffing wood, cast iron, metal, brass, aluminum bronze and stone etc. Make your work easy:the extra thick buffing polishing wheels are 70 ply, Extra plys can improve work efficiency. Diameter:6 inch face, 1/2" arbor hole, h: 1" 70 ply material: cutton. Make sure the size is right for you beFORE ORDER.

WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base #ad - Ideal for tool and cutter grinding of cemented Carbide applications. Jaw width 4-1/2". The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, and a miter gauge for precise sanding on angled edges along with a stop bar for maximum belt safety and control.

With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. Durable cast steel construction. Swing: 8 inch.

More information about WEN 6500 #ad


Similar products



POWERTEC 71003 Diamond Grinding Wheel Dresser

#ad
#ad
Southern Technology LLC 71003 #ad - Provides clean, potent tool edges and surfaces. 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right. Swing: 8 inch. Home work Shop Vise. 3. 2a motor provides up to 1150 FPM. Compatible with the entire line of WEN Bench Grinders. Solid construction means tool is long lasting. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.

Includes a 1/2-inch keyed chuck and onboard key storage. Made of green silicon Carbide. Jaw width 4-1/2". Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc. Holds 06" d to 1. 85" d pipes and tubes. Handle ridges for easy grip. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE.

POWERTEC 71003 Diamond Grinding Wheel Dresser #ad - One side flat, protector for Barrels, one side multi-groove, woodwork, v-pads, Prismatic, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Durable cast steel construction.

More information about Southern Technology LLC 71003 #ad


Similar products


Pmelax is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.